How To Take Off Window Tint

You probably are reading this critique because your window tint doesn’t look new anymore. You may have spotted some peeling along the edges, bubbles, or scratches on its surface. Luckily, you can take off your car’s window tint without hiring a professional. Here’s how to take off window tint the easy way.

Use a Hairdryer

You can remove your window tint using a hairdryer. The process also works well with a heat gun. However, you need to figure out a good corner to start removing the tint.

Hold the dryer two inches away from the window and run it high to allow the glue to melt. Remove the tip of the tint from the corner you choose. Gently pull the tint as the dryer melts glue on other parts. Once you remove the tint, clean the car windows before replacing them with another tint.

Use a Steamer

You can also use a steamer to take off your window tint. To do this, roll your car window down slightly so that the top part of the tint is visible. Steam the edges of the window from the outside to melt the adhesive.

After that, steam the other parts of the window and use a razor to lift the edges for easy pulling. Steam other edges where the adhesive hasn’t completely melted. You can then remove the entire tint once the glue melts completely.

Use Ammonia

To remove your window tint using this method, you will need ammonia, dish soap, and paper towels. Other materials that will make the process less stressful include steel wool, scissors, a spray bottle, and a razor blade.

When ammonia comes into contact with the adhesive on sunny days, it melts the glue, making it easy to peel off the tint on your car window.

Start by preparing the soap solution you will be using and fill the spray bottle. Cut some plastic bags that you will use to cover the tinted windows. Ensure the plastic wraps are large enough to fit your windows.

Spray the tinted side of the car window with ammonia solution and cover it with plastic bags. Do the same thing on the inner part and cover it with plastic. Let the plastic sit for about an hour to allow ammonia to dissolve the glue. The window tint should be easy to remove once you remove the plastic bags. Use a razor blade to remove your tint’s top or corner edges and peel it off.

After removing the tint, clean the leftover glue with ammonia and steel wool.

Use Soap and Scrape

The soap and scrape technique is perhaps the simplest way to take off window tints on your car. Prepare a soap solution and fill your spray bottle. Once done, soak the window to loosen the adhesive. Remove the edges using a razor blade or a knife. Peel off the tint gently as you continue spraying the soap solution. You may have to repeatedly scrape some sections since they might not come off immediately.

Typically, these DIY window tint removal methods are easy and don’t require any special equipment. After removing your window tint, ensure you clean the windows using a cleaner and dry them off using a towel.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.